Hybrid Turf
By DMS
CHF 990.00
CHF 99.00
/
m
PRE-ORDER ONLY !
Shipping Included ! Delivery 2-3 weeks after placing order
The Hybrid Turf brings the best in a compact package:
- Available in three length 1m*10m ; 1m*12.5m ; 1m*16.1m
- Super High Density Stitching of 63000 per sqm
- 5mm PU backing for shock absorption + Comfort + Durability
- Easy to clean install and store away : just roll out when needed and roll in when done
- No glue needed with the 5mm PU Backing.
- A Double Tape duct tape to ensure a firm positioning is recommended for Heavy Sled Work
- Markings to train your distances for Carries, Lunges, Burpees, Agility
End zones and Training areas according to the turf length:
10m: 2*1m end zones / 8m training area
12.5m: 2*1.25m end zones / 10m training area
16.1m: 2*1.8m end zones / 12,5m training area (same as Hyrox competition)
The Super High Density stitching of our turf increases
- The Durability of your turf
- The Smoothness of your Sled training
- The Comfort when doing Ground Work and Athletic Training
- Looks that last : Bright Colors and Enduring Aesthetics
- The multi-disciplines you can work on - Agility/Speed/Power/Plyo, etc
- Budget-friendly as it requires minimal maintenance and will last longer
PROPERTIES
- High Abrasion Resistance
- Anti-Slip
- High Traction Resistance
- Waterproof
- UV Resistant
- Impact Absorption
- Sound Reduction
- Vibration Distribution
- Floor Protection
- Thermic Insulation
Type of Use:
- Speed / Agility / Quickness
- Sled Training
- Free Weight area (up to 20 kg)
- Sprint Training
- Fitness area
GEAR SPECS
- Material: Polypropylene and PU Foam
- Sizes: 1m*10m ; 1m*12.5m ; 1m*16.1m
- Rolled-Up Dimensions: 1m*33cm ; 1m*40cm ; 1m*53cm
- Thickness Available: 5mm PU Backing + 15 mm Synthetic Turf piling
- Total Weight per unit: 35 kg ; 44 kg ; 57 kg
- Colors : Black + White or Custom (contact us for special request)
WARRANTY
3 Years under normal use
NOTE : Turf can flatten overtime depending on use. Hard Brush or rotating Brush will help to revive the surface
After reception of the product, let it sit for a minimum of 24h to allow the compounds to adjust to the room temperature. This will prevent shrinkage or expansion after the layout.