EPDM Puzzle Tiles with PU Foam Base
NEW PRODUCT !!
The brand new EPDM Puzzle Tiles with PU Foam Base is lighter and an economical solution versus the traditional EPDM Rubber Tiles and rolls.
With the PU foam base you still have impact and cushioning properties similar to SBR rubber making it comfortable and able to dampen impact from weights.
Regardless of the thickness, there's always a 2mm Compact EPDM Rubber layer for traction and abrasion resistance.
At the moment, we offer 6-8-10 mm thickness which is ideal for home use, walking area, cardio area and stationary machine area
- The EPDM compound is the premium surface for all type of fitness activities
- SecuredFit + Connection with Puzzle design for superior tensile strength against traction
- Ideal for Home Gym and Light Commercial Gyms
- Professional look of your installations
- Non-permanent. Ideal if you are planning to move or if you need to change your space plan.
- Glue or Duct Tape Recommended because of its lightness
- Durable + Resilient
- Soft and Firm at the same time.
- Easy to Trim with an utility knife to fit room design and total surface.
Note: It's recommended to take 10% in extra to prevent shortage because of cuts and drops in the layout.
FIELDS OF USE:
- Perfect for Home Gym or Light Commercial Gym
- Fitness & Cardio Area
- Light Weight / Bodybuilding area
- Changing room area Hockey/Football/etc
PROPERTIES:
- High impact absorption
- Anti-vibration
- Heat and sound insulation
- High abrasion and tensile strength
- Water repellent/Waterproof
- Non slippery
- Mould Resistant
GEAR SPECS
- 2mm EPDM top layer + PU Foam base
- 85% Black / 15% Flecks
- DIMENSIONS: 50*50 cm or 100*100 cm
- THICKNESS OPTIONS: 6-8-10 mm
- WEIGHT of 50cm tile: 6mm : 0.85 kg / 8mm : 1.125 kg / 10mm : 1.4 kg
- WEIGHT of 100cm tiles: 6mm : 3.375 kg / 8mm : 4.5 kg / 10mm : 5.625 kg
- Standard Color: Black Rubber and White Flecks
- COLORS ON DEMAND: Yellow Flecks / Red Flecks / Blue Flecks / Green Flecks / Red Flecks / Multicolours
Warranty
- 2 Years under normal use
NOTE : After reception of the product, let it sit for a minimum of 24h to allow the compounds to adjust to the room temperature. This will prevent shrinkage or expansion after the layout.